security solutions

In modern buildings, the Vape smoke detection problem in the bathroom actually plagues many property management parties and staff responsible for the safety of the site. They all want to know how to effectively solve this headache. Vape is what we often call e-cigarettes. The smoke it produces is lighter and more concealed than traditional cigarettes; then! The smoke particles of traditional cigarettes are different, so it is indeed a very challenging technical task to accurately detect both smoke. Moreover, the bathroom environment is relatively special, with a small space and possibly a lot of water vapor, which requires even higher performance requirements of the detector, and cannot be done by just a single ordinary device.

First of all, I have to tell you what is the difference between Vape smoke detection and traditional smoke detection. Vape smoke is mainly composed of aerosols produced by heating substances such as propylene glycol and glycerol. The particles are particularly small, about 0.1 to 1 micron; the particles of traditional cigarette smoke are relatively large and contain many tar components. Therefore, a special Vape smoke detector needs to be able to identify these tiny aerosol particles, and at the same time avoid false alarms due to normal water vapor in the bathroom or the odor that people often have. This is really critical, otherwise, if the false alarms are always going to cause trouble to death! Provide global procurement services for weak current intelligent products!

How to choose a suitable detector? There are several aspects that need to be considered carefully:

1. Detection principle : Nowadays, common ones include photoelectric, ionic, and more advanced laser scattering. The detection sensitivity of laser scattering is higher for tiny particles such as Vape, overall, so it may be better to give priority to this type.

2. Installation location : Do not install it too close to the vent, otherwise the wind may affect the detection; do not install it in the corner, where the air does not circulate much. The best location is generally the center of the ceiling, or 1-1.5 meters away from the toilet and urinal. This distance must be grasped well.

3. Sensitivity adjustment : It is best to choose a device that can adjust the sensitivity, because different time periods, such as day and night, the use frequency of the bathroom is different and the environmental interference is different. Only by adjusting it can it adapt to different situations.

4. Response speed : From the occurrence of smoke to the alarm of the detector, the shorter the time, the better. Generally, it is required to respond within 5-10 seconds, so that smoking behavior can be stopped in time.

Then there are some tips during installation and use. These are the experiences summarized in actual operation and are very practical:

1. Before installation, be sure to carefully read the product manual and do every step as required. If the wiring is wrong, the equipment may not work normally at all, and you will be in vain.

2. When installing, remember to calibrate the detector with a level to ensure that it is installed horizontally. If it is tilted, it may affect the detection accuracy and you must not be careless.

3. Clean regularly! This is really important. There is a lot of dust and heavy humidity in the bathroom. If the dust covers the detection probe Vape/smoke detection in restrooms, the sensitivity will be greatly reduced. It is generally recommended to clean it once every 1-3 months. The specific use environment is determined by

4. After installation, power on and test it, use Vape or cigarette to actually test it to see if it can really alarm normally, whether the alarm sound is loud enough, and whether it can be transmitted to the duty room. These must be confirmed clearly.

You may be concerned about some common questions, let me answer:

Question: "Will the detector treat the water vapor in the bathroom as a false alarm?" Answer: Nowadays, better detectors have humidity compensation functions, which can distinguish water vapor from smoke particles. Therefore, under normal circumstances, if the bathroom is not outrageously high, it will generally not false alarms. However, if it is a detector installed next to the shower room with particularly large water vapor, you may have to choose more carefully.

Question: "How many detectors are suitable for installing a bathroom?" Answer: This depends on the size of the bathroom. Generally, one small bathroom within 10 square meters is enough. If the area is large, more than 20 square meters, or there are compartments, two or more may be required. You can ask professional technicians to evaluate it.

Finally, let me give you a little personal opinion. When choosing Vape and smoke detectors, you must choose big brands and certified products. Don’t buy three-no products with cheap prices. The quality is not guaranteed. If the inspection is not accurate or it often breaks, it will be a waste of money. In addition, you must find a professional master to install and post-maintenance, so as to ensure the long-term and stable operation of the entire system and make the bathroom truly achieve a smoke-free environment.