Regarding, that is, thread network integration, it is actually a special wireless mesh network technology. It is a network system built to support the communication of various devices of the Internet of Things. This integration allows efficient interconnection between different devices
Advantages of thread network integration
1. High flexibility : This integration is not limited by distance and has a wide range, allowing you to fully connect to the network in different corners of the indoor and outdoor devices. Do you know how to cut? Even if the equipment is very scattered, it will not be left alone!
2. Low energy consumption : The integrated technology has particularly low energy consumption and can maintain equipment operation for several months and years. After all, in the case of so many IoT devices, energy consumption is very important, which greatly reduces the hassle of frequent battery replacement and charging.
There are also global procurement services for those who do weak current intelligence products! Very practical
Specific integration steps
1. Preparation : You must prepare equipment that supports protocols, such as gateways. Don't underestimate this gateway, it is a bridge that allows the equipment to communicate with the outside world. In addition, you must ensure that the firmware of the device is up to date and must be backed up to prevent upgrade errors from affecting use.
2. Network configuration : In terms of gateway startup, after setting up the gateway, you must bind it to the gateway through your mobile phone and computer software. Next, you must set the network name, password and channel. Only when the channel is set correctly can the association be smoother! After the settings are completed, start the entire integrated installation process, which is a key operation!
3. Device connection : Add the devices into the network one by one in order. The operation is to add them according to the pairing method prompted by the manual guide of each device. After adding, the work will be basically done. In this way, every device can be smoothly integrated into this big network family and do their own jobs.
Related tips and some special knowledge supplements
In reality, I have met many friends who don’t know much about subnets and mainnets, how can I distinguish them? In this way, the main network is like a commander, monitoring network conditions and processing large-scale data. The subnet is relatively small in scale, specializing in the operation of some local special services, and the main network subnet can also communicate information.
In addition, if you want to add many devices with one click with the software, remember to check whether the software settings are correct in advance. Don’t make mistakes in the end, as this can greatly save time and energy! I have seen many people who do not pay attention to this and cause big problems, which is not worth the loss.
Encryption measures must be taken seriously for security settings in network integration, and both network and equipment must be operated with key access passwords.
Below are some common questions to solve everyone's confusion, and they all solve practical problems to the point
FAQs and Answers
Q: Why does communication between my two sub-devices not smoothly? Is it related to encryption?
A: This is basically not related to encryption. Thread Network Integration may be caused by the channel being interfered with, or there are obstacles between the devices to block the signal. You must eliminate the obstacles between the two. If you really can't try changing the channel.
Q: During the integration process, the system repeatedly prompts the connection timeout. What should I do?
A: Don’t be anxious or not. Check whether the device has sufficient battery power and whether the hardware performance is good. You can restart the gateway and then re-operate the connection process later.
Q: The device is added but always shows offline status.
A: Many friends have fallen into this. First check if there is any problem with the connection to the gateway, and then check if there is any complete pairing of the encryption pairing of the subnet and the access device. If not, unplug the power supply and turn it on again after a while.
I always think this thing has a wide range of uses and prospects. Even if we have this or something in integrated operation, we can use and develop this integrated smart network technology well by following the correct approach, operating steadily and accumulating experience slowly. By then, the home or the Internet of Things world can become a warm and flexible collective, and each object interacts like life. And with the help of procurement services, network deployment is more convenient. I believe that the future of weak current intelligent networks will definitely be bright!
Leave a Reply