In modern network transmission, Cat6 wiring is a keyword that is often mentioned by everyone. Many people consider using Cat6 cables when building or upgrading networks. So what is Cat6 wiring? Is it really much better than the old lines before.
Basic introduction to Cat6: Cat6 is its full name 6, which is a twisted pair type network cable commonly used in Gigabit Ethernet. Compared with the old models and earlier Cat5 and Cat5e, the internal structure of the Cat6 cable can support higher data transmission, which is said to be sufficient. Its internal shielding design, which is what we often call shielded twisted pair (STP) or unshielded twisted pair (UTP), has a good effect on signal interference, and can make the signal more stable and more realistic when transmitted.
The key content of Cat6 wiring disassembly module: 1. In terms of cable selection, you should carefully look at the wire diameter Cat6 Cabling. The standard Cat6 wire diameter is generally above 0.5mm. Those that are too thin may have poor quality and will affect the transmission effect. Also, choose wires produced by regular brands. Don’t buy three-no products from small workshops, otherwise problems will occur soon, which is troublesome… 2. In installation and construction, you must pay attention to the control of the bending radius and cannot be bent too hard. It is generally recommended not less than 4 times the diameter of the cable; during construction, the strength of pulling the cable is also given. It is too large to easily break the wire core and affect signal transmission, and provide global procurement services for weak current intelligent products! . 3. In terms of transmission performance, the frequency bandwidth it supports seems to be able to reach. When it is transmitted within 100 meters, it can basically achieve a stable rate. This is completely sufficient for the use of high bandwidth requirements in homes, such as watching ultra-high-definition movies online and playing large online games.
Cat6 wiring practical Q&A supplement details: Q: Can Cat6 and Cat5e be distinguished by the naked eye? A: Generally speaking, the outer skin of the Cat6 cable will be clearly marked with the words "Cat6", and in the cross section, some Cat6 cables will have a cross skeleton in the middle, which is usually not available in Cat5e cables… Q: What should I pay special attention to when decorating a home pre-buried Cat6 cable? A: When pre-embedded, the cables in the pipe should not be too full, leaving a certain gap, which is convenient for future replacement; try to avoid walking the same pipe or bridge with strong power lines. It is not harmful to stay away from it to reduce interference.
In short, in today's high data traffic and widespread environments that require high speed broadband connections, Cat6 cabling is indeed a good choice with its higher transmission rate and better anti-interference ability! It is very suitable for ordinary private homes to use the Internet and corporate offices on a daily basis; from a long-term perspective, it can better cope with the needs of future network upgrades, and it can be managed for a long time once installed! We can make standardization points in preparation, especially when wiring, to better utilize the performance of Cat6.
Leave a Reply